Skip to content

Intergrain 4L UltraPrep Timber Cleaner

Save 17% Save 17%
Original price $92.40
Original price $92.40 - Original price $92.40
Original price $92.40
Current price $77.00
$77.00 - $77.00
Current price $77.00
  • A high strength timber cleaner
  • Includes citric acid for natural cleaning power
  • Removes dirt, tannins, oils and other contaminants
Intergrain UltraPrep Timber Cleaner is a high strength cleaner that restores grey, rust or tannin stained, mould or mildew affected timber to a clean appearance suitable for coating. UltraPrep Timber Cleaner is also used to clean and prepare new timber for coating by removing the dirt, tannins, oils and other contaminants that are present. Intergrain UltraPrep Timber Cleaner has a non-bleaching formula and contains oxalic acid, which is a naturally occurring, bio-degradable organic acid.



PREPARATION



1. Remove surface dirt by sweeping or washing down with water.



APPLICATION



1. Shake UltraPrep Timber Cleaner thoroughly. Mix ONE (1) part UltraPrep Timber Cleaner to FOUR (4) parts water in a plastic container. For severe staining a stronger solution or repeat applications may be necessary. Tannin rich timbers may also require repeat applications; wash until the water used to rinse UltraPrep Timber Cleaner off is clear.
2. CAUTION: Wear waterproof gloves and safety glasses. Avoid contact with painted, concrete or metal surfaces and vegetation. May be corrosive to metals. Rinse off thoroughly if contact occurs.
3. Wet the timber surfaces to be cleaned with water.

4. Apply UltraPrep Timber Cleaner mixture generously to the timber with a stiff bristle brush, broom or scouring pad. Scrub the timber vigorously. Clean complete sections at one time. Spot cleaning should be avoided to prevent patchy results.

5. Leave mixture on the timber for 10-15 minutes. If necessary, apply more mixture to keep timber damp throughout this period. For best results UltraPrep Timber Cleaner should be applied to cool surfaces, out of direct sunlight, to avoid the cleaner drying on the timber.
6. Rinse off exterior surfaces thoroughly using maximum pressure from a garden hose or using a high pressure water cleaner. A high pressure water cleaner is recommended for large areas or badly discoloured timber.

Note: Failure to thoroughly remove mixture may result in timber discolouration under clear finishes.
7. Allow timber to dry thoroughly before applying further products.

Note: After cleaning, some timber species will appear lighter due to loss of water soluble extractives. Richer colour is generally restored on application of the finish.

Decking Wood Members

Enter Your Email To Receive Discounts & Special Offers